Brushless Micromotor Kit 1053 Dual Handpiece Kit

SPECIAL ORDER ITEM - SHIPS IN ABOUT 7-10 DAYS AFTER ORDER IS PLACED

Foredom K.1053 Dual Handpiece Kit comes with 2 handpieces. Brushless rotary handpiece connects to port in the back of the control box. It runs virtually vibration free with high torque throughout the entire speed range of 1,000-50,000 rpm. Brush type hammer handpiece operates at 1,000-2,500 strokes per minute. Connects to port in front of the control box. Control box with digital display, variable speed foot pedal, 2 handpiece cradles and an extra fuse also included. 

Product Features: 

-Brushless motor design carbon brushes NEVER need changing.
-Maximum Torque or Watts Output 10 oz. in or 70mNm or 230W. Powerful even at minimum speeds.
-Sealed housing eliminates dust noise and vibration. 

Additional port for Brush Type Micromotor Handpiece:
Brushless micromotor is excellent for usage at high, medium and low speeds.
 

• High Speed provides smooth, clean and sharp detailing in metal and wood. It's also great for bright-cutting, grinding, finishing, texturing and polishing. You never need to change the brushes on this handpiece.

• Medium Speed it is ideal for effortless and fast stock removal in wood, diestone or acrylics.

• Low Speed offers extra control and power for stone setting and milling.

HP4-817 Control Box and Front Panel LED
 

• 50/60 Hz, 100VA, 5.4" wide, 9.1 deep, 7" high.

• Dial speed control sets precise speed and torque.

• Digital display for precise speed and torque settings: Auto cruise, Forward or Reverse rotation, Dial or Foot speed control.

• Built in overload protection.

• Brushless micromotor handpiece connects to port on back side of control box.

• Brush type handpiece connects to port in front.

H.MH-150 Brushless Handpiece/Motor
 

• 6.3" Long, 1.06" motor diameter, .75" grip diameter, 8.4 oz./237.7grams, 115 Volt.

• Ergonomic and brushless with long-lasting ceramic ball bearings.

• Bur changes are quick and easy with a simple twist of the front section of the Handpiece.

• Comes with either 2.35mm (3/32") collet installed.

H.MH-110 Brush Type Hammer Handpiece/Motor
 

• 6-1/4" overall length, 9/16" grip diameter, 13oz./369grams, 1.5amps (115V).

• Ideal for stone setting applications and engraving techniques.

• Slender contoured grip and impact adjustment ring for precise hammering work.

• Operates from 0-2,500 strokes per minute. The force of the impact of the H.MH-110 reciprocating handpiece can be adjusted from light to full by turning the metal ring while the motor is off or running.

• The speed of the hammer action can also be varied from 0-2,500 strokes per minute with the dial on the control unit.

• Used with the supplied Graver Holder, the handpiece becomes a precision power engraver - no need for an air compressor or a flexible shaft drive.

Handpiece Accessories:
 

• 3-Anvil Points with Threaded Shanks (HP10177)

• 1-Graver Holder with Allen Key (HPH8-214). Screws into the front end of the handpiece and converts it into a power engraving tool. Comes with 5/64" Allen key (graver not included).

• 1-5mm Open End Wrench, handpiece Cradle (HP4-933), Spare Motor Brushes (HP4-163), 2 Pins used to tighten Anvil Points.

HP7-7060 Foot Speed Control
 

• Variable speed foot control works with control box HP4-717. Varies speed from 1,000 - 50,000 RPM.