{"title":"Tools \u0026 Equipment\/Bench Work\/Bench Hand Tools\/Flexshaft Kits \u0026amp; Motors \/Engraving","description":null,"products":[{"product_id":"foredom-brushless-motor-1050html","title":"Brushless Micromotor Kit 1050 w\/ 2nd Port for Optional Brush Type Handpiece","description":"\u003cp\u003eThis high torque, high speed micromotor is great for a variety of tasks. On \u003cstrong\u003ehigh speed\u003c\/strong\u003e, it can be used for diamond bright cutting, grinding, finishing, texturing, polishing, and for clean, sharp detailing on metal. On \u003cstrong\u003emedium speed\u003c\/strong\u003e, it can be used for effortless stock removal in wood and acrylic. On \u003cstrong\u003elow speed\u003c\/strong\u003e, it provides precise control for diamond setting and milling. Comes with 2.35 mm collet and foot control. 3.0 mm collet is available for diamond flywheels.\u003c\/p\u003e\n\u003cp\u003eThis premier brushless kit has the fastest and most powerful handpiece of any in the FOREDOM line. The high speed (up to 50,000 RPM) gives exceptionally smooth cuts and even when used more slowly it will not bog down. This kit makes signing your work easy. It has a sealed housing that prevents dust and debris from clogging your motor and since it is brushless, you never have to replace carbon brushes. The dual port on the control box allows you to add a brush type handpiece.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003caddress style=\"text-align: center;\"\u003e\n\u003cstrong\u003eK.1050 Brushless Micromotor\u003c\/strong\u003e (\u003cspan style=\"font-size: 12px;\"\u003eadditional Port for connecting a \u003c\/span\u003e\u003cspan style=\"font-size: 12px;\"\u003eBrush Type Handpiece)\u003c\/span\u003e\n\u003c\/address\u003e\n\u003cp\u003e\u003ciframe height=\"315\" width=\"420\" src=\"https:\/\/www.youtube.com\/embed\/yo7VPZnJI60?rel=0\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eForedom Dual Part 1050 Micromotor \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eComplete Kit : Control Unit, Power Cord Brushless Handpiece Handpiece Holder, Phillips Screw,Washer Foot Pedal Handpiece Cradle Collet Changing Wrench.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eBrush Type Handpiece \u003c\/span\u003e\u003cspan\u003emay be used with Kit \u003c\/span\u003e\u003cspan\u003eK.1050 but is NOT \u003c\/span\u003e\u003cspan\u003eincluded with this kit\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh Speed provides smooth, clean, and sharp detailing in metal and wood. It’s also great for bright cutting, grinding, finishing, texturing, and polishing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eMedium Speed is for effortless and fast stock removal in wood, diestone, or acrylic.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow Speed offers extra control and power for stone setting and milling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eForedom Collet Change K.1050 Micromotor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003ciframe height=\"315\" width=\"420\" src=\"https:\/\/www.youtube.com\/embed\/TjGROodabTc\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eHow to attach \u0026amp; remove accessories \u0026amp; to change handpiece collets. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eBrushless motor– there's never a need to replace carbon brushes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh torque motor is powerful even at minimum speeds.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSealed housing eliminates dust, noise and vibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePermanently lubricated, shielded ball bearings require no lubrication.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eComes with spare fuse and collet changing wrench inside handpiece box. Collets can be installed and changed. Consider Collet Adapters, that step down collet sizes without having to switch out a collet for handpieces with 1\/8″ collets.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":42908852977859,"sku":"70-390","price":1009.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/k1050dual1_1_1.jpg?v=1708771158"},{"product_id":"foredom-micro-motorhtml","title":"Foredom Brush Type Micromotor High Speed Rotary Kit 1070","description":"\u003cp\u003e\u003cimg style=\"vertical-align: bottom; display: block; margin-left: auto; margin-right: auto;\" title=\"FOREDOM Logo\" src=\"{{media%20url=\" wysiwyg alt=\"FOREDOM Logo\" width=\"300\"\u003e\u003c\/p\u003e\n\u003cp\u003eFOREDOM's  K.1070 iis the \u003cspan\u003emost popular micromotor kit for high speed applications up to 38,000 rpm including light deburring of cast pieces, bright cutting in jewelry making and fine detailing in wood. \u003c\/span\u003e\u003cspan style=\"font-size: 12px;\"\u003eIt has the added advantage \u003c\/span\u003e\u003cspan style=\"font-size: 12px;\"\u003eof taking up very little valuable space on your bench. Used in \u003c\/span\u003e\u003cspan style=\"font-size: 12px;\"\u003econjunction with a flex shaft, it is the ideal tool for fine detailing \u003c\/span\u003e\u003cspan style=\"font-size: 12px;\"\u003eand polishing. Get it with a 1\/8″ collet and the HPL4-3236 \u003c\/span\u003e\u003cspan style=\"font-size: 12px;\"\u003e‘Step Down‘ Collet Adapter that allows you to use burs with \u003c\/span\u003e\u003cspan style=\"font-size: 12px;\"\u003e3\/32″ (2.35mm) shanks without the hassle of changing a collet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eKit Includes \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControl Box \u003c\/li\u003e\n\u003cli\u003eHandpiece with 2.35mm (3\/32\") or 1\/8\" collet \u003c\/li\u003e\n\u003cli\u003eVariable speed foot control\u003c\/li\u003e\n\u003cli\u003eHandpiece cradle \u003c\/li\u003e\n\u003cli\u003eSpare pair of motor brushes\u003c\/li\u003e\n\u003cli\u003eSpare fuse and collet changing wreches \u003c\/li\u003e\n\u003cli\u003eKit is already set for 110-115 Volt use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e Key Features \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSlender, contoured grip rotary type handpiece with quick release collet for easy bur changes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse for precise, high speed work– light deburring of cast pieces, bright cutting in jewelry, and detailing in woodcarving\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFan cooled, brush type continuous duty motor runs cool and vibration-free\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePermanently lubricated, shielded ball bearings require no lubrication.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSpecifications: 6.2″ Long, 5\/8″ Diameter at grip, 1″ at motor, 7.3 oz\/208g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDC30V\/1.2A, 4.2 in.- oz or 29.4mNm or 100W Max Torque or Watt Output\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12px;\"\u003e\u003cstrong\u003e\u003cspan\u003eOverview of FOREDOM's Micromotor Kit with Motor Brushes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003e\u003ciframe style=\"display: block; margin-left: auto; margin-right: auto;\" src=\"\/\/www.youtube.com\/embed\/iNVwwUjjTrE\" width=\"420\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12px;\"\u003eK.1070 Micromotor Changing Accessories and Collets\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12px;\"\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/ocGyLUmY-3E\" width=\"420\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12px;\"\u003eK.1070 Micromotor Changing Motor Brushes \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ciframe style=\"display: block; margin-left: auto; margin-right: auto;\" src=\"\/\/www.youtube.com\/embed\/DnMba733Jj8\" width=\"420\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":53361744019821,"sku":null,"price":427.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/1070micromotor.jpg?v=1708771160"},{"product_id":"grs-gravermachr-athtml","title":"GRS 004-965 Gravermach AT","description":"\u003cimg style=\"float: left; margin-right: 15px; width: 150px\" src=\"{{media%20url=\" wysiwyg\u003e\u003cimg style=\"float: right; position: relative; left: 10px; top: 5px; margin-bottom: 5px; margin-left: 15px; width: 200px\" src=\"{{media%20url=\" wysiwyg alt=\"\"\u003e\u003cp style=\"text-align: justify\"\u003eThe GraverMach AT offers optimal working comfort and precision in a wider range of creative jobs than ever before.\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003eThis premium pneumatic system is the first stand-alone air controller from GRS to offer fully-integrated Airtact technology. Airtact is a remarkable breakthrough that allows the user to switch effortlessly between hand and foot controls using one simple knob, and offers an expanded range of precise, selectable hand control that puts this tool in a class by itself.\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e\u003cb\u003e400 - 8,000 strokes per minute ◆ High-end performance with two precision air regulators ◆ Quick-connect air couplings ◆ Two handpiece outlets ◆ One additional auxiliary connector for other rotary tools ◆ 24 volt power connector for worldwide use ◆ Carrying handle ◆ Built-in tool storage ◆ Compatible with all GRS Standard and AT Handpieces.\u003c\/b\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003eFoot control and multi-mount air filter included with purchase. Oil-free air compressor and GRS handpieces sold separately.\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003eAll GRS engraving systems and workholding tools are manufactured in the United States of America at the GRS Manufacturing Facility in Emporia, Kansas. GRS warranties its products for a full two years after purchase against defects in material and workmanship.\u003c\/p\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":42927960588483,"sku":"64-766","price":2395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/004-965_2-1w-1.jpg?v=1709309359"},{"product_id":"k-2230-jewelers-kit-w-handpiece-43pc-accessory-w-rotating-bur-holderhtml","title":"Foredom K.2230 – Classic Jewelers Kit with H.30 Handpiece","description":"\u003cdiv id=\"tab-description\" class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" role=\"tabpanel\" aria-labelledby=\"tab-title-description\"\u003e\n\u003cp\u003eK.2230 – Classic Jewelers Kit with H.30 Handpiece.\u003cbr\u003eM.SR motor, C.FCT foot control, H.30 handpiece, 42-pc accessory kit and rotating bur holder.\u003cbr\u003eMultiple plug and volt options available. 230V options include the necessary corresponding speed control and motor components.\u003cbr\u003ePrePackaged Tool Kits take guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications. They contain just about everything you need to get to work- motor, speed control, handpiece and accessories. When purchased with an optional motor hanger, you are ready to go straight out of the box!\u003c\/p\u003e\n\u003cp\u003eMotor and Speed Control carry a 2-Year Limited Warranty.\u003c\/p\u003e\n\u003cp\u003eComponents:\u003c\/p\u003e\n\u003cp\u003e1. Series SR Motor: Foredom’s most popular and best motor for general use. The 1\/6 HP, ball bearing, hang-up style; M.SR runs in forward and reverse at speeds up to 18,000 RPM. It comes equipped with a motor bale for hanging, and our standard 39″ long key tip inner shafting for connecting to Foredom’s key tip handpieces.\u003c\/p\u003e\n\u003cp\u003e2. C.FCT Speed Control: Foredom’s most popular foot operated variable speed control in a heavy duty plastic housing with an extra wide design.\u003c\/p\u003e\n\u003cp\u003e3. H.30 Handpiece: Foredom’s most popular general purpose handpiece features a 3-jaw, geared chuck with a 0-5\/32″ capacity. Accessory changes are easy using the supplied HPCK-0 Chuck Key in molded plastic handle.\u003c\/p\u003e\n\u003cp\u003e4. AK11 Accessory Kit: 42-pc. assortment of metal working accessories including various shapes, sizes and grits of Satin Finishers, Bristle and Brass Cup, Wheel \u0026amp; End Brushes, Scotch-BriteTM Radial Bristle Discs, High Speed Steel Fluted Engraving Burs, Rubber Bonded Abrasive Wheel and Disc, Aluminum Oxide Sanding Bands, Screw and Rubber Drum Mandrels, V Stone and Unitized Points, and Platinum White Polishing Compound.\u003c\/p\u003e\n\u003cp\u003e5. A-10081 Rotating Bur Holder\u003c\/p\u003e\n\u003cp\u003e6. Flexible Shaft Grease\u003c\/p\u003e\n\u003c\/div\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":42927963144387,"sku":"70-203","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/70-203-2.jpg?v=1709309382"},{"product_id":"jewelers-k-2293-powergraver-kit-with-engraving-handpiecehtml","title":"Foredom K.2293 Jewelers PowerGraver Kit with Engraving Handpiece","description":"\u003cp style=\"text-align: center;\"\u003e\u003cimg height=\"76\" width=\"297\" alt=\"FOREDOM Logo\" title=\"FOREDOM Logo\" wysiwyg=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eIf you want to do true engraving without committing to the large investment of an air powered system, then this is the kit for you. The PowerGraver is a dedicated system with specialized components that offers a power assist to stone setting, engraving and texturing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eM.PGX High Torque\/Low Speed permanent magnet hang-up motor with 39″ long S-93 Inner Shaft, S-76N Neoprene Outer Sheath \u0026amp; MP319P Motor Brushes. Standard key tip shafting for use with all interchangeable handpieces. Outer Sheath is more flexible neoprene material.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eC.EMGX Dial Speed Control adjusts speed up to 2,800 RPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eH.9D Handpiece with 1\/16″, 3\/32″, 1\/8″, and 3mm collets. Has a special quick disconnect that fits ONLY the M.PGX motor sheath. Adjusting ring changes the impact force. Palm rest provides the comfort and “feel” of a hand engraving tool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAccessories: carbide stylus, anvil point, set of 4 gravers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eC.FCGX On\/Off Foot Switch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA-DVD125 32-minute long instructional video.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":42927966716099,"sku":"64-727","price":759.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/motor-foredom.jpg?v=1709309416"},{"product_id":"70-315","title":"Foredom K.1030 Portable Brush Type Rotary Micromotor Kit","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew micromotor with pocket\/pouch-size control unit has built-in lithium-ion rechargeable battery for the ultimate in portability. The control unit features a digital RPM display at the top that makes it easy to monitor speed as you work. The dial on the front adjusts speed from 0 – 30,000 RPM.\u003c\/li\u003e\n\u003cli\u003eRun time is approximately 5 hours, depending on how long the micromotor is in continuous use when in battery mode, or plug it in for day-long use. Battery charge time is 3 hours.\u003c\/li\u003e\n\u003cli\u003ePerfect for users who work at multiple stations, or for signing\/personalizing work pieces at craft and outdoor fairs when no power is available.\u003c\/li\u003e\n\u003cli\u003eThe handpiece (motor) is small and lightweight yet has plenty of power for fine detailing, polishing and even grinding on metal, wood, glass and many other materials. Its fan cooled, brush type continuous duty motor runs cool and vibrationfree. It has permanently lubricated, shielded ball bearings that require no additional lubrication.\u003c\/li\u003e\n\u003cli\u003eThe handpiece has a twist release rotary type collet for easy changes of 3\/32″ or 1\/8″ shank burs, depending on collet installed.\u003c\/li\u003e\n\u003cli\u003eComes with spare Motor Brushes HP8-163 and Collet Changing Wrenches HP4-993. Collets can be installed and changed. Consider Collet Adapters, that step down collet sizes without having to switch out a collet, for handpieces with 1\/8″ collets.\u003c\/li\u003e\n\u003cli\u003eK.1030 Kits Carry a Two Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eView Instructional Manual Below\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca title=\"K.1030 Instructional Manual\" href=\"\/downloadsLink\/Downloads\/Instruction-Manual\/Foredom-K1030.pdf\" target=\"_blank\"\u003e\u003cimg title=\"Foredom K.1030\" src=\"{{media%20url=\" wysiwyg alt=\"K.1030\" width=\"141\" height=\"169\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFOREDOM's \u003cstrong\u003eNEW\u003c\/strong\u003e battery operated kit offers the ultimate in portability without sacrificing power. You have the freedom of truly cordless operation although you can plug it into an outlet for day-long use. Perfect if your work involves moving from station to station, or for use at craft and outdoor fairs when no power is available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControl Unit with Built-in Rechargeable Battery\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFront: Speed Control Dial\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTop: Handpiece Connector Port 2-Digit RPM Display LED Indicator Lights: Optional On\/Off Foot Switch in use, Rotational Direction, Battery\u003cbr\u003eCharging, and Overload\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSide On\/Off Button\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePanels: Adapter\/Charger Connector Port Forward\/Reverse Button Optional Foot Switch Connector Port On\/Off Foot Switch (Optional) Button\u003c\/p\u003e\n\u003cp\u003eSpecifications: 2-3⁄4″ Wide, 1-1⁄4″ Deep, 5-1⁄4″ Tall, 9.77 oz. Output: DC 12V\/1.2A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandpiece– Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications: 5″ Long, 1\/2″ Diameter at grip, 7\/8″ at motor, 6.46 oz\/183g Cord Length: 59″\u003c\/p\u003e\n\u003cp\u003eDC12V\/1.2A, 4.11 in.- oz or 29mNm or 25W Max Torque or Watt Output\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRechargeable Lithium Ion Battery\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications: 14.8v – 1,800mAh Charging Time: 3 hours, Working Time: 5 hours\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCharger\/Adapter with cord set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications: Input: 110-240 Volt, 50\/60hz, Output: DC18V\/1.8A\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg title=\"Foredom Logo\" src=\"{{media%20url=\" wysiwyg alt=\"Foredom Logo\" width=\"297\" height=\"76\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":42927967699139,"sku":"70-315","price":377.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/70-315-2_1.jpg?v=1709309435"},{"product_id":"deluxe-woodcarving-tx-motor-kit-with-heavy-duty-speed-control-h-44t-handpiecehtml","title":"Foredom Deluxe Woodcarving TX Motor Kit with Heavy Duty Speed Control \u0026amp","description":"","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":42927968190659,"sku":"70-219","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/70-219-1_1.jpg?v=1709521729"},{"product_id":"grs-gravermax-g8html","title":"SmartPro Air Do X Engraver and Micromotor Combo","description":"\u003cp\u003eThe Air Do X by SMARTPRO is a complete package for Jewelry makers and designers. It is ideal for stone setting, engraving, drilling, polishing, buffing, lapping, and more thanks to its 2 in 1 technology. With the flip of a switch you can use this unit as an engraver or a micro-motor. There is no need to connect a compressor! It is a true all-in-one unit!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe system can achieve powerful engraving strokes that starts from just 400 SPM and can reach up to 8000SPM. The high precision micro motor speed can reach up to 35000 RPM.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe speed of the system can be controlled automatically by the control knob or with the foot pedal at various speeds.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-in-1 Control Box\u003c\/li\u003e\n\u003cli\u003eFootpedal\u003c\/li\u003e\n\u003cli\u003eMicro-Motor Handpiece\u003c\/li\u003e\n\u003cli\u003eGraver Handpiece\u003c\/li\u003e\n\u003cli\u003eGravers\u003c\/li\u003e\n\u003cli\u003e100-240V Adaptor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":42927983395011,"sku":"64-790","price":975.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/64-790a.jpg?v=1709309588"},{"product_id":"grs-graver-smithhtml","title":"GRS GraverSmith Air System, 005-895","description":"\u003cp\u003e\u003cimg style=\"float: left; margin-right: 15px; width: 150px;\" wysiwyg=\"\" data-mce-style=\"float: left; margin-right: 15px; width: 150px;\"\u003e\u003cimg style=\"float: right; margin-left: 20px; margin-bottom: 5px; width: 150px;\" alt=\"\" wysiwyg=\"\" data-mce-style=\"float: right; margin-left: 20px; margin-bottom: 5px; width: 150px;\"\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: left;\"\u003eThe new  compact GraverSmith air system delivers essential functionality without sacrificing power or precision, making it ideal for production stone setters, multiple factory installations, and craftspeople on a budget. Its brushless DC motor and streamlined internal design ensure exceptional reliability, while precision-machined components provide the durability needed for years of dependable service. \u003ci\u003eHandpiece(s) sold separately. GraverSmith requires clean, oil-free compressed air to function.\u003c\/i\u003e\u003c\/p\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":42931232768195,"sku":"64-767","price":1275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/004-895new.jpg?v=1730689413"},{"product_id":"proxxon-3865-glass-metal-engraving","title":"Proxxon 3865 Glass\/Metal Engraving Set","description":"\u003cp\u003e\u003cstrong\u003eThe Glass\/Metal  Engraving Set Includes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEngraver\u003c\/li\u003e \u003cli\u003eAC Adapter\u003c\/li\u003e \u003cli\u003eA trial glass\u003c\/li\u003e \u003cli\u003e2 Diamond bits for engraving and live line work\u003c\/li\u003e \u003cli\u003e2 silicon carbide attachment for shading and frosting.\u003c\/li\u003e \u003c\/ul\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":42931233652931,"sku":"64-972","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/64-972_1_Glass-Metal-Engraving-Set.jpg?v=1709519016"},{"product_id":"foredom-k-2230-classic-jewelers-kit-with-h-30-handpiece-copy","title":"Foredom K.8302 Kit – SR motor with M.SCT pedal and H.30 Handpiece","description":"\u003cdiv aria-labelledby=\"tab-title-description\" role=\"tabpanel\" class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\"\u003e\n\u003cp\u003eFlex Shaft Tool Sets include combinations of motors, speed controls, and handpieces – the three key components of a complete flexible shaft machine. Unlike our Pre-Packed Kits, they do NOT include rotary accessory assortments, but do include a tube of grease.\u003c\/p\u003e\n\u003cp\u003eMotor and Speed Control carry a 2 Year Limited Warranty.\u003c\/p\u003e\n\u003cp\u003eComponents:\u003c\/p\u003e\n\u003cp\u003e1. Series SR Motor: best motor for general use. The 1\/6 HP, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It comes with a 39″ long key tip inner shaft and outer sheath for connecting to any of Foredom’s key tip compatible handpieces.\u003c\/p\u003e\n\u003cp\u003e2. C.SCT Speed Control: durable electronics and smooth control  in a heavy cast iron housing. The added weight eliminates any unexpected movement of the control along the floor and the bottom surface of the speed control is covered with non-skid material. CSA listed.\u003c\/p\u003e\n\u003cp\u003e3. Flexible shaft grease\u003c\/p\u003e\n\u003cp\u003e4. Foredom’s most popular interchangeable handpieces that fit key tip shafts only.\u003c\/p\u003e\n\u003cp\u003e5. H.30 Handpiece: chuck-style handpiece features a 3-jaw, geared chuck with a 0-5\/32″ capacity. Accessory changes are easy with this handpiece using the supplied HPCK-0 Chuck Key.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":51660689244525,"sku":"70-201","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/70-201.webp?v=1731211883"},{"product_id":"foredom-k-100-kit-sr-motor-with-m-sct-pedal-and-h-30-handpiece-copy","title":"Foredom K.2252 Chisel Carving Kit","description":"\u003cdiv id=\"tab-description\" class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" role=\"tabpanel\" aria-labelledby=\"tab-title-description\"\u003e\n\u003cp\u003ePrepackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.\u003c\/p\u003e\n\u003cp\u003eMotor and Speed Control carry a 2-Year Limited Warranty. 230V options include the necessary corresponding speed control and motor components.\u003c\/p\u003e\n\u003cp\u003e1. Series LX Motor: These permanent magnet motors are specifically designed for high torque\/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling.\u003c\/p\u003e\n\u003cp\u003e2. C.EMX Speed Control: is a table top speed control in heavy duty plastic housing. It has a dial control for precise speed settings, as well as good repeatability of previous settings. The\u003cbr\u003eC.EMX-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a cord with plug that fits the motor’s shielded plug. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 5″ long, 5-7\/8″ wide, 2-3\/4″ high, 2 lb \/1 kg packaged wt. It is interchangeable with Foredom’s C.TXR-1 and C.SXR-1 controls.\u003c\/p\u003e\n\u003cp\u003e3. H.50 Chisel Handpiece: works in all types of wood, plastic, and plaster. This handpiece has a contoured body design that\u003cbr\u003efeatures a rugged plastic barrel and tapered aluminum ends. The easy to maintain chisel handpiece is recommended for use at low speed with Series TX and LX motors and in forward rotation only with Series SR motors. Handpiece attaches to any flex shaft machine with a standard key tip shaft. The Chisel Handpiece must be used only in the forward motor direction. Optimum Speed Range- 3,000-10,000 rpm.\u003c\/p\u003e\n\u003cp\u003eMax. Operating Speed- 18,000 rpm.\u003c\/p\u003e\n\u003cp\u003eHandpiece specifications: 6″ long, 1″ in diameter, 4.6 oz, 6.65 oz packaged wt.\u003c\/p\u003e\n\u003cp\u003eMaintenance: After every 200 hours of use you should clean and lubricate this handpiece. The old grease must be cleaned off of the interior cam chamber and replaced with new lubricant. If you do not have Foredom Grease (Part No. MS10008), it is available in our web store under Supplies and Parts – Lubrication- All Lubricants. Follow the instructions that came with your handpiece or click on the link for step by step maintenance instructions. Operating Tip: Using the chisel handpiece with a dial speed control is easier than with a foot operated control. Table top dial controls are available separately and named below. Consider ordering a kit containing the chisel handpiece and dial speed control (kit depends on motor -M.TX \u0026amp; M.LX or M.SR- that you have). Certain Foredom bench mounted flex shafts also come with dial controls built into their bases (models M.LXM, M.TXM and M.SRM).\u003c\/p\u003e\n\u003cp\u003e4. 6pc Chisel SetAKHK550 with A-KC503, A-KC504, A-KC505, A-KC506, A-KC509, and A-KC510 chisels, 5pc Chisel Set AKHK560 with A-KC501, A-KC502, A-KC507, A-KC508, and A-KC511 chisels and 6pc Chisel Set AKHK570 with A-KC512, A-KC513, A-KC514, A-KC515, A-KC516, and A-KC517 chisels.\u003c\/p\u003e\n\u003cp\u003e6. Flexible shaft grease\u003c\/p\u003e\n\u003c\/div\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":51660690391405,"sku":"70-213","price":459.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/70-213.webp?v=1731212172"},{"product_id":"foredom-k-2252-chisel-carving-kit-copy","title":"Foredom K.TXH440 Kit","description":"\u003cdiv id=\"tab-description\" class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" role=\"tabpanel\" aria-labelledby=\"tab-title-description\"\u003e\n\u003cp\u003ePrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.\u003c\/p\u003e\n\u003cp\u003eMotor and Speed Control carry a 2 Year Limited Warranty.\u003cbr\u003eComponents:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries TX Motor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eForedom’s most powerful flex shaft machines with 1\/3HP have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. Comes equipped with a motor bale for hanging, and 63-3\/4″ Square drive inner shaft and outer sheath for connecting to any of Foredom’s square drive compatible handpieces.\u003c\/p\u003e\n\u003cp\u003eSquare drive flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpeed Controls:\u003c\/strong\u003e Each of these have electronics that convert AC current from an electrical outlet to DC current, the type required by Series TX motors. They also have a different style plug that is made to fit the motor’s shielded-type plug to avoid any confusion with other motors you might own.\u003c\/p\u003e\n\u003cp\u003eC.SXR-1 foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable electronics as the C.TXR-1.\u003c\/p\u003e\n\u003cp\u003eH.44HT Handpiece: square drive, collet style handpiece is for exclusive use with our Series TXH, SRH and LXH heavy duty flex shafts. It comes with 3\/32″, 1\/8″ and 1\/4″ collets. The tapered design allows for close and safe work.\u003c\/p\u003e\n\u003cp\u003eAKHK25: 10-pc accessory kit includes 2 CeramCut Blue stones, 1 Carbide Bur, 1-1\/2″ Cut-Off Wheel, 2 Rubber Bonded Abrasive 7\/8″ Wheels, 2″ Wire Brush and 3 mandrels. All with 1\/8″ shanks.\u003c\/p\u003e\n\u003cp\u003eFlexible shaft grease\u003c\/p\u003e\n\u003c\/div\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":51660699271533,"sku":"70-222","price":539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/70-222.webp?v=1731213221"},{"product_id":"foredom-k-8302-kit-sr-motor-with-m-sct-pedal-and-h-30-handpiece-copy","title":"Mtor Brushes for CC,DD,MM Motors","description":"","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":51660700615021,"sku":"70-267","price":10.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/70-267.webp?v=1731213454"},{"product_id":"mtor-brushes-for-cc-dd-mm-motors-copy","title":"Threaded Anvil Points choice of 6 or 6pc Kit","description":"\u003cp\u003eMade in USA\u003c\/p\u003e\n\u003cp\u003eHP10171  Ball Nose 3\/32″ (2.35mm) dia.\u003c\/p\u003e\n\u003cp\u003eHP10172  Fine Point .015″ (.4mm) dia.\u003c\/p\u003e\n\u003cp\u003eHP10173  Square 3\/32″ (2.35mm)\u003c\/p\u003e\n\u003cp\u003eHP10175  Cylinder 7\/32″ (6mm) dia.\u003c\/p\u003e\n\u003cp\u003eHP10176  Rectangle 3\/32″ x 3\/16″ (2.35mm x 4.8mm)\u003c\/p\u003e\n\u003cp\u003eHP10179  Bezel Rocker 5\/16″ x 1\/16″ (8mm x 1.6mm)\u003c\/p\u003e\n\u003cp\u003eAK101 includes one each of HP10171, HP10172, HP10173, HP10175, HP10176 and HP10179 in a plastic case with cover and a wrench pin.\u003c\/p\u003e\n\u003cp\u003eUse with hammer handpieces H.15, H.15D and H.15SJ. Also works with Foredom micromotor hammer handpiece HPMH-011 that comes in micromotor kits K.1080 and K.1090. Fits 1\/8-48 US and all standard 3mm threads. Fits Swiss-made Badeco hammer handpiece.\u003c\/p\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":51660701139309,"sku":"70-289","price":84.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/70-289.webp?v=1731213719"},{"product_id":"threaded-anvil-points-choice-of-6-or-6pc-kit-copy","title":"Foredom AK797210 BBelt Sander","description":"\u003cp\u003e\u003cstrong\u003eThe H.30® Handpiece – or one of the similar handpieces listed below is required in order to use this sander!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKits includes:\u003c\/p\u003e\n\u003cp\u003e10 Sandpaper Belts and Mounting Tools included with Kits:\u003cbr\u003e* 10mm x 257mm Belt, 180 grit installed\u003cbr\u003e* 3 ea. of 100, 180 \u0026amp; 240 grit, 10mm Belts\u003cbr\u003e* A-69210 Drive Cup and A-69219 Hex Key, Foredom’s Belt Sander Attachment comes with a 180 grit belt installed and also includes 3 each of 100, 180, and 240 grit belts. The Belt Sander offers a power assist to sanding jobs and can be used to sand and smooth metal, wood, acrylic and composite materials. It is an all metal, quality-machined aluminum device that attaches with ease over the top of a Foredom H.30® handpiece (also fits H.30SJ slip joint and H.30H square drive models). It has 3 permanently lubricated ball bearings. Sandpaper belts measuring 10mm width x 257mm long come with the attachment and are available separately in 5-packs and assortments.\u003c\/p\u003e\n\u003cp\u003eSpecifications: 4-78″ long x 1-3\/4″ wide (at widest) x 2″ tall. Ship weight: 8 oz.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":51660701204845,"sku":"70-337","price":91.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/70-337.webp?v=1731214070"},{"product_id":"foredom-hp4-960-variable-speed-control","title":"Foredom MADCH-1 Dust Collector Hood","description":"\u003cp\u003e\u003cstrong\u003eMade of heavy gauge sheet metal construction with non-skid pads on the bottom.\u003cbr\u003eHas 2-1\/2″ (64mm) adapter that fits most dust collection system hoses.\u003cbr\u003eMeasures 6-1\/2″ h, 4-5\/8″ d (165mm h. x 219mm d.)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Lathe not included. Price includes ONE hood only. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":51660703203693,"sku":"70-487","price":61.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/70-487.webp?v=1731214566"},{"product_id":"foredom-k-330-bench-lathe-kit","title":"Foredom K.3390 Bench Lathe  Kit","description":"\u003cdiv\u003e\n\u003cp\u003eKit includes the M.BL Bench Lathe with A-TM-5 and A-TM-6 Tapered Spindles, bars of Tripoli, Platinum White and Blue, and Carnauba Wax, Two 4″ buffs (CBF4 and CYR4), Four 3″ buffs (CBF3, CBC3, CFB3, and LCB3). This Kit was formerly called the BL-15 Kit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan class=\"formdetail\"\u003e\u003cspan class=\"bodycopy\"\u003eThe M.BL Bench Lathe has a high torque, permanent magnet motor that is extremely quiet and smooth running. Cast iron base has mounting holes and suction cup feet for a secure hold on the work surface.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"prod-detail-desc\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"bodycopy\"\u003e1\/6 horespower, high torque motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e115 Volt\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"bodycopy\"\u003eSpeed Range: 500-7,000 rpm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"bodycopy\"\u003e125 Watts (continuous rating)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"bodycopy\"\u003eMotor shaft diameter:  5\/16″\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"bodycopy\"\u003eHeight: 5-1\/8″\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"bodycopy\"\u003eWidth:  13″ between spindles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"bodycopy\"\u003eWeight:  7.5 lbs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"bodycopy\"\u003eCSA Certified\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"bodycopy\"\u003eTwo Year Limited Warranty\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon Lathe\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Includes wheels and compounds","offer_id":51660709822829,"sku":"70-516-1","price":320.45,"currency_code":"USD","in_stock":true},{"title":"Lathe Only","offer_id":51660709855597,"sku":"70-516","price":348.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/70-516-1.webp?v=1731215363"},{"product_id":"brushless-micromotor-kit-1053-dual-handpiece-kit","title":"Brushless Micromotor Kit 1053 Dual Handpiece Kit","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER ITEM - SHIPS IN ABOUT 7-10 DAYS AFTER ORDER IS PLACED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"box-sizing: inherit;\"\u003eForedom K.1053 Dual Handpiece Kit\u003c\/span\u003e comes with 2 handpieces. Brushless rotary handpiece connects to port in the back of the control box. It runs virtually vibration free with high torque throughout the entire speed range of 1,000-50,000 rpm. Brush type hammer handpiece operates at 1,000-2,500 strokes per minute. Connects to port in front of the control box. Control box with digital display, variable speed foot pedal, 2 handpiece cradles and an extra fuse also included. \u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e\u003cspan style=\"box-sizing: inherit;\"\u003e\u003cu style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003eProduct Features:\u003c\/u\u003e\u003c\/span\u003e \u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e-Brushless motor design carbon brushes NEVER need changing.\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e-Maximum Torque or Watts Output 10 oz. in or 70mNm or 230W. Powerful even at minimum speeds.\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e-Sealed housing eliminates dust noise and vibration. \u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003eAdditional port for Brush Type Micromotor Handpiece:\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e\u003ci style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e\u003cspan style=\"box-sizing: inherit;\"\u003eBrushless micromotor is excellent for usage at high, medium and low speeds.\u003c\/span\u003e\u003c\/i\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e \u003c\/p\u003e\n\u003cul style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0); margin-top: 1rem; margin-bottom: 1rem; padding-left: 20px; color: rgb(0, 0, 0); font-family: 'Source Sans Pro', sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 300; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003e\u003cspan style=\"box-sizing: inherit;\"\u003eHigh Speed\u003c\/span\u003e provides smooth, clean and sharp detailing in metal and wood. It's also great for bright-cutting, grinding, finishing, texturing and polishing. You never need to change the brushes on this handpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003e\u003cspan style=\"box-sizing: inherit;\"\u003eMedium Speed\u003c\/span\u003e it is ideal for effortless and fast stock removal in wood, diestone or acrylics.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003e\u003cspan style=\"box-sizing: inherit;\"\u003eLow Speed\u003c\/span\u003e offers extra control and power for stone setting and milling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e\u003cspan style=\"box-sizing: inherit;\"\u003eHP4-817 Control Box and Front Panel LED\u003c\/span\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e \u003c\/p\u003e\n\u003cul style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0); margin-top: 1rem; margin-bottom: 1rem; padding-left: 20px; color: rgb(0, 0, 0); font-family: 'Source Sans Pro', sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 300; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003e50\/60 Hz, 100VA, 5.4\" wide, 9.1 deep, 7\" high.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eDial speed control sets precise speed and torque.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eDigital display for precise speed and torque settings: Auto cruise, Forward or Reverse rotation, Dial or Foot speed control.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eBuilt in overload protection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eBrushless micromotor handpiece connects to port on back side of control box.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eBrush type handpiece connects to port in front.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e\u003cspan style=\"box-sizing: inherit;\"\u003eH.MH-150 Brushless Handpiece\/Motor\u003c\/span\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e \u003c\/p\u003e\n\u003cul style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0); margin-top: 1rem; margin-bottom: 1rem; padding-left: 20px; color: rgb(0, 0, 0); font-family: 'Source Sans Pro', sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 300; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003e6.3\" Long, 1.06\" motor diameter, .75\" grip diameter, 8.4 oz.\/237.7grams, 115 Volt.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eErgonomic and brushless with long-lasting ceramic ball bearings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eBur changes are quick and easy with a simple twist of the front section of the Handpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eComes with either 2.35mm (3\/32\") collet installed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e\u003cspan style=\"box-sizing: inherit;\"\u003eH.MH-110 Brush Type Hammer Handpiece\/Motor\u003c\/span\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e \u003c\/p\u003e\n\u003cul style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0); margin-top: 1rem; margin-bottom: 1rem; padding-left: 20px; color: rgb(0, 0, 0); font-family: 'Source Sans Pro', sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 300; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003e6-1\/4\" overall length, 9\/16\" grip diameter, 13oz.\/369grams, 1.5amps (115V).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eIdeal for stone setting applications and engraving techniques.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eSlender contoured grip and impact adjustment ring for precise hammering work.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eOperates from 0-2,500 strokes per minute. The force of the impact of the H.MH-110 reciprocating handpiece can be adjusted from light to full by turning the metal ring while the motor is off or running.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eThe speed of the hammer action can also be varied from 0-2,500 strokes per minute with the dial on the control unit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eUsed with the supplied Graver Holder, the handpiece becomes a precision power engraver - no need for an air compressor or a flexible shaft drive.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e\u003cspan style=\"box-sizing: inherit;\"\u003eHandpiece Accessories:\u003c\/span\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e \u003c\/p\u003e\n\u003cul style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0); margin-top: 1rem; margin-bottom: 1rem; padding-left: 20px; color: rgb(0, 0, 0); font-family: 'Source Sans Pro', sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 300; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003e3-Anvil Points with Threaded Shanks (HP10177)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003e1-Graver Holder with Allen Key (HPH8-214). Screws into the front end of the handpiece and converts it into a power engraving tool. Comes with 5\/64\" Allen key \u003ci style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e(graver not included)\u003c\/i\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003e1-5mm Open End Wrench, handpiece Cradle (HP4-933), Spare Motor Brushes (HP4-163), 2 Pins used to tighten Anvil Points.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e\u003cspan style=\"box-sizing: inherit;\"\u003eHP7-7060 Foot Speed Control\u003c\/span\u003e\u003cbr style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0);\"\u003e \u003c\/p\u003e\n\u003cul style=\"box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0); margin-top: 1rem; margin-bottom: 1rem; padding-left: 20px; color: rgb(0, 0, 0); font-family: 'Source Sans Pro', sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 300; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\n\u003cli style=\"box-sizing: inherit;\"\u003e\n\u003cp\u003eVariable speed foot control works with control box HP4-717. Varies speed from 1,000 - 50,000 RPM.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":51828497154413,"sku":"70-390-3","price":1562.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/K1053.webp?v=1741380864"},{"product_id":"brushless-micromotor-kit-1053-dual-handpiece-kit-copy-_pos-2-_sid-6bad554db-_ss-r","title":"Badeco MX-2 Revolt Nano SP Micromotor Set, HP460 + PC800","description":"\u003cp\u003e\u003cstrong\u003eThe Badeco MX-2 Revolt Nano SP is the perfect versatile precision tool, ready to use for all the precision tasks performed in the watchmaking, jewelry industries\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis set consists of the ultra-integrable MX-2 Revolt controller, featuring a real carbon front panel, two motor sockets, an OLED speed indicator, and a new motor memory system (recording the last speed setting and pedal or manual mode). Equipped with the precise, light and powerful RS3000SP nano-motor with carbon body and with the precise quick-change HP 460 hand piece, it comes with a Combi PC800 pedal (on\/off contact or variable speed), a MX screw-on stand, and the ASF-021 bench mount.\u003c\/p\u003e\n\u003cp\u003eAlso compatible with the Strong RS2000 micromotor and the high-speed RS3000V nano-motor,\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003ethe MX-2 Revolt Nano SP set is the ultimate complete tool for nearly all tasks,\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eas the RS3000SP motor allows to work up to 12,500 Rpm with a high torque of 15.5 cNm fr this small size. The RS3000SP versatile nano-motor offers comfort and precision due to its compact size, while still maintaining impressive efficiency. Furthermore, thanks to its very light weight (100gr), it helps prevent the frequent joint issues that intensive users may suffer from. Finally, the new OLED speed display allows fine adjustment and precise duplication of production ranges, which will be particularly appreciated in teaching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIts advantages:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSmall, lightweight, very efficient, reliable, compact, versatile, practical, and precise for a very reasonable and advantageous budget. With two motor outputs and speed display. Unmatched power and 100% SWISS MADE.\u003c\/p\u003e\n\u003cp\u003eThe Badeco MX-2 Revolt Nano SP Set is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eideal for your finest operations such as polishing, milling, drilling, stretching, scraping, filing, engraving, setting, hammering, deburring, beveling, … with one or the other motor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eThis Badeco MX-2 Nano SP micromotor set includes the following pieces:\u003c\/b\u003e\u003c\/p\u003e\n\u003ch4\u003eMX-2 Revolt\u003c\/h4\u003e\n\u003ch4\u003eDC Power\u003c\/h4\u003e\n\u003ch4\u003eRS3000\u003c\/h4\u003e\n\u003ch4\u003eHP 460\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003ePC800\u003c\/h4\u003e\n\u003ch4\u003eMX Foot\u003c\/h4\u003e\n\u003ch4\u003eASF-021\u003c\/h4\u003e","brand":"A\u0026A Jewelry Suppy","offers":[{"title":"Default Title","offer_id":51873592934765,"sku":"73-002-02","price":2175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6796\/3427\/files\/MX-2RevoltLightNanoSPHP460PC800.jpg?v=1784517909"}],"url":"https:\/\/aajewelry.com\/collections\/tools-equipment-bench-work-bench-hand-tools-flexshaft-kits-amp-motors-engraving.oembed","provider":"A\u0026A Jewelry Supply","version":"1.0","type":"link"}